Process of Sheet steel fabrication includes manufacturing process of sheet steel parts right from their design to finished assemblies. The above process encompasses  three essential areas … Design& Development, Production and Fabrication.

We have State of the art machinery, High capacity material handling cranes, Latest software tools and Skilled work force to produce best results in each of these there areas.

With these facilities we can manufacture Sheet steel fabricated assemblies from few Kgs. to few Tens of Tons.

Design & Development : Advance software tools are used to create 3D model of product as required by the customer. These are then unfolded with software to get developed  drawings of flat product. These drawings are then processing through programs of CNC Laser cutting machines and CNC bending machines.

We use software tools like Autocad, Radan 3D design, Radan BendCNC, Radan Nesting and Trumpf Tops100 for Laser cutting and Bending operations. Usage of these software tools enable us to cut and shape precision components with minimal wastages and faster speed. In turn we can supply products  faster and economical.

Production : With the aid of  software programs parts are cut in Laser cutting machines. We have state of the are Laser cutting machines which can cut parts with extremely low tolerance levels. These parts then  pass through the process of shaping i.e. they are then bent using CNC press brakes. We have  In some cases, as per the design parts are punched in CNC Turret Punch Presses.

Fabrication : After cutting and bending/punching processes various parts of assembly are sent for fabrication where they are joined by riveting, welding or screwing. This is another critical area for Sheet steel fabricators, as smallest deviation from tolerance limit can cause wastage of entire assembly.

We have latest welding facilities for MIG/MAG/TIG welding, Projection welding, CO2 welding and Gas welding. To add precision to these operations we deploy out of the box tools such as Demmeler Modular fixtures, Welding Robots, etc.

The fabricated assemblies are sent for surface preparation and coating. A sheet steel assembly surface needs to be prepared for coating as there are several not uniformities and impurities that can act as a hindrance for protective coating. In order to ensure a good bonding between the metal and the protective coat,  various methods like shot blasting, liquid dipping are used depending on the type of material. After preparing the surface, the assemblies are coated  by powder coating, Epoxy Painting or  Zinc Plating, as per requirement.

We have latest facilities of shot blasting, seven tank treatment, etc. for surface treatment. We have powder coating and epoxy painting facilities at our manufacturing plants.